***********************************************************************
*  ROPES Version 12.0 Fix RMC12017 to base Version 12.0 - 07/26/2006  *
*                 This fix applies to ROPES V12.0.                    *
***********************************************************************
*Installation Instructions
*    1. Create the data set to receive the TRANSMITed data set.  The
*       JCL in ALLOC.JCL will do this for you. Upload this job and
*       tailor it for your installation.  Run the job to create the
*       data set.
*    2. Upload the .XMI files to the data sets created in step 1. The
*       OBJECT.XMI file is uploaded to the &SYSUID.RMC12017.OBJECT.XMI
*       data set, etc.
*    3. Upload the INSTALL.JCL file.  Tailor this job for your in-
*       stallation and run the job to install the modification.
***********************************************************************
*RMC12017 - 08/03/2007 - For some LPD servers the Job Id must not be
*                        nulls (X'00').
*
*Problem Summary:
*    Some LPD servers will not accept a Job Id value that is X'00'.
*    The ROPES LPR Printing support has a coding error that causes the
*    job id value to be X'00' and some servers will not accept the job.
*
*Symptoms:
*    A non-zero response is received from the LPD when the Control File
*    is transmitted.
*
*Temporary Fix:
*    The following replacement object modules must be obtained from
*    technical support:
*        ROPELPRP
*
*Permanent Fix:
*    This problem will be corrected by PTF in the next release of
*    ROPES.
*
*End Of Document
***********************************************************************