***********************************************************************
*  ROPES Version 12.0 Fix RMC12023 to base Version 12.0 - 07/26/2006  *
*                 This fix applies to ROPES V12.0.                    *
***********************************************************************
*Installation Instructions
*    1. Create the data set to receive the TRANSMITed data set.  The
*       JCL in ALLOC.JCL will do this for you. Upload this job and
*       tailor it for your installation.  Run the job to create the
*       data set.
*    2. Upload the .XMI files to the data sets created in step 1. The
*       OBJECT.XMI file is uploaded to the &SYSUID.RMC12023.OBJECT.XMI
*       data set, etc.
*    3. Upload the INSTALL.JCL file.  Tailor this job for your in-
*       stallation and run the job to install the modification.
***********************************************************************
*RMC12023 - 03/24/2008 - ROPEDRVR logic for IP devices will not paginate
*                        correctly if new data arrives during the time
*                        that the printer is active printing an earlier
*                        document.
*
*Problem Summary:
*    Logic in the IP support to insure the proper byte count value for
*    data sent to LPR devices caused the current top of form status of
*    the printer to be lost if data arrives for a new document during
*    the processing of a previous document.
*
*Symptoms:
*    The printer prints the newly arrived document as if the printer
*    had been idle and at the top of form.  The printer will usually
*    not be at the top of form in this circumstance and the new docu-
*    ment prints where the earlier document left off, and the pagination
*    for the printer is lost.
*
*Temporary Fix:
*    The following replacement object module must be obtained from
*    technical support:
*        ROPEDRVR
*
*    THIS FIX SUPERCEDES RMC12022.
*
*Permanent Fix:
*    This problem will be corrected by PTF in the next release of
*    ROPES.
*
*End Of Document
***********************************************************************